3D Interactive Model
Click left mouse on the model to tumble or rotate. right mouse to drag, thumb-wheel to zoom.
Database Information Shipwreck Name
Basic Information
Name(s) Unidentified aka Tiller Wreck
Registry
Official Number
Vessel Type Schooner
Year Built
Year Sank
Hull Material Wood
Engines None
Dimensions
Length ft
Width ft
Depth ft
Vessel History
Complete Historic Information Link –
Wreck Site Information
Lake Ontario
State or Province Ontario
Depth 110 ft
GPS Coordinates 43° 14.755′ N 079° 17.072′ W
Site Description The Tiller Wreck sits nearly intact on the bottom about two miles from the Port Dalhousie harbor entrance. The two-masted schooner Tiller Wreck is a local favorite dive site out of Port Dalhousie, ON in Lake Ontario. It is unidentified and nicknamed the Tiller Wreck due to the large tiller it ports. It has one mast and one large boom extant on site.
Model Information
Photographer
Photographer(s) Zac Whitrock
Year Captured June 2022
Time it took to capture 40 min
Modeler Information
Modeler Ken Merryman
Date Completed 6-2022
Hours of input to complete 4 hrs
Technical Information
Photography
Camera – Canon 5d Mark IV in a Nauticam Housing with an 8” Dome Port; GoPro
Lens – Canon EF Zoom 8-15mm set at 15 mm
Sensor – 36.0 x24.0mm Cmos 30.4 megapixel
Multi-Camera Rig – No
Camera Propulsion – DPV,
Video or Stills – Stills
Number of images Submitted – 2,045
Image resolution (pixels) 1,372 -6720 x4480; 673 – 2704×1520
Lighting – Artificial & Natural
Number of lights – 4
If known Kelvin Temperature CRI 90
Light Output Lumens 2×10000, 2×5000
Model Information
Software Used Agisoft Metashape Professional Version 1.8.0 Build 13794
Data Format .jpg converted from RAW
Number of Source Images used – 1,831
Are these images original or adjusted; Adjusted
Portion of the site covered: Complete
Publishing Restrictions
Licensing Usage Restrictions CC BY-ND
Attributed to: 3DShipwrecks.org
Resource Data in Database
Model Yes
Source Images Yes
Source CC .jpg
Number of Still Images
Video Clip None
Processing Report Yes
Camera Calibration .xml Yes